Book Chapter (40)
601.
Book Chapter
Hierarchical structure and repair of bone deformation, remodelling, healing. In: Self healing materials: an alternative approach to 20 centuries of materials science, pp. 323 - 335 (Ed. van der Zwaag, S.). Springer, Berlin (2007)
602.
Book Chapter
Mechanics of the expanding cell wall. In: The expanding cell, pp. 191 - 215 (Eds. Verbelen, J. P.; Vissenberg, K.). Springer, Berlin (2006)
603.
Book Chapter
Mechanics of the wood cell wall. In: Characterization of the cellulosic cell wall, pp. 30 - 37 (Eds. Stokke, D. D.; Groom, L. H.). Blackwell, Oxford (2006)
604.
Book Chapter
Material properties: mineral crystals. In: The bone quality book - a guide to factors influencing bone strength, pp. 56 - 63 (Eds. Dempster, D.; Felsenberg, D.; van der Geest, S.). Elsevier, Amsterdam (2006)
605.
Book Chapter
Complex biological structures: collagen and bone. In: Neutron scattering in biology: techniques and applications, pp. 205 - 223 (Eds. Fitter, J.; Katsaras, J.). Springer, Berlin (2006)
606.
Book Chapter
Phase separation in binary alloys - modeling approaches. In: Moving interfaces in crystalline solids, pp. 57 - 116 (Ed. Fischer, F. D.). Springer, Vienna (2004)
607.
Book Chapter
Microfibril angle in wood: characterisation using x-ray scattering and influence on mechanical properties. In: COST Action E20 Wood Fibre Cell Wall Structure, pp. 189 - 202 (2004)
608.
Book Chapter
Influence of mineral particle characteristics on the local mechanical properties of human crown dentin. In: Biomineralization (BIOM 2001): formation, diversity, evolution and application, pp. 353 - 356 (Eds. Kobayashi, I.; Ozawa, H.). Tokai University Press, Kanagawa (2004)
609.
Book Chapter
Collagen: hierarchical structure and viscoelastic properties of tendon. In: Elastomeric proteins: structures, biomechanical properties, and biological roles, pp. 175 - 188 (Eds. Shewry, P. R.; Tatham, A. S.; Bailey, A. J.). Cambridge University Press, Cambridge (2003)
610.
Book Chapter
Rapid Prototyping biomimetisch gestalteter Materialien. In: Verbundwerkstoffe: 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, pp. 785 - 789 (Ed. Degischer, H.-P.). Wiley-VCH, Weinheim (2003)
611.
Book Chapter
Rapid prototyping of ceramic and polymeric cellular materials. In: EMBEC'02 - 2. European Medical and Biological Engineering Conference, IFMBE Proceedings Part 1 + Part 2, 1. Auflage Ed., pp. 172 - 173 (Ed. Hutten, H.). Verlag der Technischen Universität Graz (2002)
612.
Book Chapter
Spinodal decomposition. In: Phase Transformations in Materials, pp. 409 - 480 (Ed. Kostorz, G.). Wiley-VCH, Weinheim (2001)
613.
Book Chapter
Materiaux cellulaires: chapter 14. In: Traité des matériaux - Volume 19 - Matérieux émergents, pp. 373 - 396 (Eds. Janot, C.; Ilschner, B.). Presses Polytechniques et Universitaires Romandes, Lausanne (2001)
614.
Book Chapter
Variability of microfibril angles in softwoods, hardwoods and reaction wood. In: Proceedings of the First International Conference of the European Society for Wood Mechanics, pp. 23 - 36 (Ed. Navi, P.). Ecole Polytechnique Fédérale de Lausanne, Lausanne (2001)
615.
Book Chapter
Cellulose orientation in the wood cell wall. In: Proceedings of the International Symposium on Wood Machining - Properties of Wood and Wood Composites Related to Wood Machining: 27 - 29 September, 2000, Vienna, Austria, pp. 31 - 37 (Ed. Stanzl-Tschegg, S. E.). Christian-Doppler-Laboratory for Fundamentals of Wood Machining, Wien (2000)
616.
Book Chapter
Microfibril angle determined by X-Ray scattering and the correlation with mechanical properties of wood. In: Plant Biomechanics 2000: Proceedings of the 3rd Plant Biomechanics Conference Freiburg - Badenweiler August 27th to September 2nd 2000, pp. 436 - 442 (Eds. Spatz, H.-C.; Speck, T.). Georg Thieme, Stuttgart (2000)
617.
Book Chapter
Computer simulation of atomic lattice models for phase separation in alloys with coherent lattice misfit. In: Japan Institute of Metals, Proceedings, Vol 12, (jimic-3), Pts 1 and 2: Solid - Solid Phase Transformations, pp. 745 - 752 (Eds. Koiwa, M.; Otsuka, K.; Miyazaki, T.). Japan Inst. Metals, Sendai (1999)
618.
Book Chapter
3-dimensional Monte Carlo simulations of directional precipitate coarsening in alloys under external load. In: Japan-Institute-of-Metals-Proceedings-Volume-12-JIMIC-3.-Solid-Solid-Phase-Transformations-Conference, pp. 557 - 560 (Eds. Koiwa, M.; Otsuka, K.; Miyazaki, T.). Japan Inst. Metals, Sendai (1999)
619.
Book Chapter
Determination of spiral angles of elementary fibrils in the wood cell wall: comparison of small-angle X-ray scattering and wide-angle X-ray diffraction. In: Microfibril angle in wood: the proceedings of the IAWA/IUFRO international workshop on the significance of microfibril angle to wood quality; Westport, New Zealand, November, 1997, pp. 140 - 156 (Ed. Butterfield, B. G.). IAWA (1998)
620.
Book Chapter
Kleinwinkelstreuung an komplexen Festkörpern: Beispiele aus Materialwissenschaft und Biologie. In: Streumethoden zur Untersuchung kondensierter Materie: Vorlesungsmanuskripte des 27.1FF-Ferienkurses vom 4. bis 15. März 1996 im Forschungszentrum Jülich, pp. C8.1 - C8.14. Forschungszentrum Jülich GmbH, Jülich (1996)
621.
Book Chapter
Veränderungen des Kollagens bei Ho: YAG-Laserthermokeratoplastik. In: 8. Kongreß der Deutschsprachigen Gesellschaft für Intraokularlinsen Implantation, pp. 574 - 578 (Ed. Pham, T.). Springer, Berlin (1994)
622.
Book Chapter
117, pp. 44 - 47. Springer, Berlin (1993)
Implantation into fullerites. In: Springer Series in Solid-State Sciences, Vol. 623.
Book Chapter
Kinetics of phase separation along stable trajectories. In: Dynamics of ordering processes in condensed matter, pp. 223 - 231 (Eds. Komura, S.; Furukawa, H.). Plenum Press, New York (1988)
Conference Paper (26)
624.
Conference Paper
From cell contractility to curvature-controlled tissue growth. In: 10th International Symposium on Biomechanics and Biomedical Engineering, 124. 10th International Symposium on Biomechanics and Biomedical Engineering, Berlin, April 11, 2012. (2012)
625.
Conference Paper
247, 012031, (2010)
Mineral crystal alignment in mineralized fracture callus determined by 3D small-angle X-ray scattering. Journal of Physics: Conference Series 626.
Conference Paper
1187, KK01-05, (2009)
Mechanical function of a complex three-dimensional suture joining the bony elements in the shell of the red-eared slider turtle. MRS Symposium Proceedings 627.
Conference Paper
40, pp. S78 - S82 (2007)
Scanning X-ray imaging with small-angle scattering contrast. Journal of Applied Crystallography 628.
Conference Paper
40, pp. S564 - S567 (2007)
Fracture of poly(vinylidene fluoride): a combined synchrotron and laboratory in-situ X-ray scattering study. Journal of Applied Crystallography 629.
Conference Paper
40, pp. S466 - S470 (2007)
A new experimental station for simultaneous X-ray microbeam scanning for small- and wide-angle scattering and fluorescence at BESSY II. Journal of Applied Crystallography 630.
Conference Paper
The stick-slip mechanism in wood: evidence for a critical role of hemicelluloses in the mechanical performance. In: The Hemicelluloses Workshop 2005, pp. 69 - 75 (Eds. Entwistle, K. M.; Walker, J. C. F.). The Hemicelluloses Workshop, University of Canterbury, Christchurch, New Zealand, January 10, 2005 - January 12, 2005. Wood Technology Research Centre, Christchurch (2005)
631.
Conference Paper
874, L5.11, pp. 79 - 84 (2005)
Relating local bone stiffness and calcium content by combined nanoindentation and backscattered electron imaging. MRS Symposium Proceedings 632.
Conference Paper
874, L1.9, pp. 67 - 72 (2005)
Architectural changes of trabecular bone caused by the remodeling process. MRS Symposium Proceedings 633.
Conference Paper
874, L7.9, (2005)
The influence of the thermal treatment of hydroxylapatite scaffolds on the physical properties and the bone cell ingrowth behaviour. MRS Symposium Proceedings 634.
Conference Paper
Hierarchical structure and mechanical adaptation of biological materials. In: Learning from Nature How to Design New Implantable Biomaterialsis: From Biomineralization Fundamentals to Biomimetic Materials and Processing Routes, pp. 15 - 34 (Eds. Reis, R. L.; Weiner, S.). NATO Advanced Study Institute, Alvor, Algarve, October 13, 2003 - October 24, 2003. Springer, Dordrecht (2004)
635.
Conference Paper
782, A5.17, (2004)
3D small angle X-ray scattering (SAXS) on deformed PVDF foils. MRS Symposium Proceedings 636.
Conference Paper
823, W8.8, (2004)
Regular, low density cellular structures - rapid prototyping, numerical simulation, mechanical testing. MRS Symposium Proceedings 637.
Conference Paper
Nanostructure analysis of complex materials using two-dimensional small angle X-ray scattering. In: Materials Science, Testing and Informatics I, pp. 411 - 418. 3rd Hungarian Conference and Exhibition on Matrerials Science, Testing and Informatics, BALATONFURED, HUNGARY, October 14, 2001 - October 17, 2001. (2003)
638.
Conference Paper
Transformation induced plasticity (TRIP) in a maraging steel - the TRIP behavior for general loading paths. In: IUTAM Symposium on Mechanics of Martensitic Phase Transformation in Solids, pp. 87 - 94 (Ed. Sun, Q. P.). IUTAM Symposium on Mechanics of Martensitic Phase Transformation in Solids, HONG KONG UNIV, SCI & TECHNOL, HONG KONG, PEOPLES R CHINA, June 11, 2001 - June 15, 2001. Springer, Dordrecht (2002)
639.
Conference Paper
Microscopic diffusion mechanisms in Fe-Al, Ni-Ga and (Ni fe)-Al B2 phases. In: Diffusion in Materials, DIMAT2000, PTS 1&2, pp. 349 - 355. 5th International Conference on Diffusion in Materials, PARIS, FRANCE, July 17, 2000 - July 21, 2000. Trans Tech Publications Ltd, Zürich (2001)
640.
Conference Paper
628, CC2.3, (2000)
Inorganic-organic hybrid polymers from surface-modified oxometallate clusters. MRS Symposium Proceedings