Bidan, C. M.: Geometric control of tissue growth and organisation. Dissertation, 185 S., Universität Potsdam, Potsdam (2012)

Galvis, L.: Raman spectroscopy investigation of organic matrix orientation and chemistry changes during fracture healing. Dissertation, Technische Universität Berlin, Berlin (2012)

Kerschnitzki, M.: Bone material characteristics influenced by osteocytes. Dissertation, Humboldt-Universität zu Berlin, Mathematisch-Naturwissenschaftliche Fakultät I (2012)

Saxe, F.: Significance of Cell-Wall Ultrastructure for Growth and Mechanical Properties of Arabidopsis thaliana. Dissertation, Universität Potsdam, Potsdam (2012)

Schreiber, N.: Untersuchungen der Wurzelkontraktionsprozesse in Anomatheca laxa und Trifolium pratense. Dissertation, Universität Vechta, Vechta (2012)

Baumgartner, J.: Nucleation and growth of magnetite nanoparticles under biomimetic conditions. Dissertation, Universität Potsdam, Potsdam (2011)

Krauss, S.: Characterization of the relations between structure and deformation behavior in deer antler and turtle shell. Dissertation, Humboldt-Universität, Berlin (2011)

Lange, C.: Mineral deposition and maturation during bone development. Dissertation, Freie Universität, Berlin (2011)

Prass, J.: Verformung hexagonal geordneter, mesoporöser Materialien durch die Wechselwirkung mit Fluiden. Untersuchungen mittels Kleinwinkelröntgenbeugung. Dissertation, Humboldt-Universität, Berlin (2011)

Schenk, A. S.: On the structure of bio-inspired calcite-polymer hybrid crystals. Dissertation, Universität Potsdam, Potsdam (2011)

Kommareddy, K.: The influence of scaffold stiffness, geometry and growth faster on the kinetics of osteoblast tissue growth in-vitro. Dissertation, Freie Universität, Berlin (2010)

Liu, Y. F.: The micro-mechanical and structural properties of callus tissue during bone healing. Dissertation, Humboldt-Universität, Berlin (2010)

Märten, A.: Dreidimensionale Charakterisierung der Mikrostruktur des Dentins. Dissertation, Technische Universität Berlin, Berlin (2010)

Müter, D.: Sorption von Fluiden in mesoporösen Silikamertialien: Modellierung des Sorptionsverhaltens und elastischer Verformungen. Dissertation, Humboldt-Universität, Berlin (2010)

Seto, J.: On the multiscale, mechanical behaviors of mineralized bones. Dissertation, Technische Universität, Berlin (2010)

Vetter, A.: Mechanobiology of healing and regeneration of bone. Dissertation, Humboldt Universität, Berlin (2010)

Goswami, L.: Enzymatic modification of wood cell walls and its influence on material properties and function. Dissertation, Humboldt-Universität, Berlin (2009)

Rüggeberg, M.: The mechanical and structural design of tissue interface in the Mexican Fanpalm (Washington robusta) and the Giant Reed (Arundo donax). Dissertation, Albert-Ludwigs-Universität, Freiburg im Breisgau (2008)

Eder, M.: Structure, properties and function of single wood fibres of Norway spruce (Picea abies [L.] Karst.). Dissertation, Universität für Bodenkultur, Wien (2007)

Jungnikl, K.: The macromolecular structure of wood cell walls and its significance for selected hierachical levels. Dissertation, Albert-Ludwigs-Universität, Freiburg i. Br. (2007)

Ruffoni, D.: Modeling of material and architectural quality of trabecular bone. Dissertation, Universität Potsdam, Potsdam (2007)

Sapei, L.: Characterisation of silica in Equisetum hyemale and its tranformation into biomorphous ceramics. Dissertation, Universität Potsdam, Potsdam (2007)

Hartmann, M.: Lattice Models in Materials Science - Diffusion, Trabecular Bone Remodelling and Linear Elastic Networks. Dissertation, Humboldt-Universität, Berlin (2006)

Wagermaier, W.: Synchrotron X-ray diffraction studies of bone structure and deformation. Dissertation, Universität von Leoben, Leoben (2006)

Zickler, G. A.: Structure and mechanical properties of carbon- and silica-based nanomaterials. Dissertation, Universität von Leoben, Leoben (2006)

Woesz, A.: Rapid Prototyping zellulärer Materialien. Dissertation, University of Minings, Leoben (2004)

Dunlop, J. W. C.: The physics of shape changes in biology. Habilitation, Universität Potsdam, Potsdam (2016)

Faivre, D.: Biological and Biomimetic Formation and Organization of Magnetic Nanoparticles. Habilitation, 105 S., Universität Potsdam, Potsdam (2014)

Weinkamer, R.: Processes in living bone and the resulting structural changes – computational studies. Habilitation, Humboldt-Universität, Berlin (2012)

Burgert, I.: On the mechanical design of plant cell walls. Habilitation, Universität Potsdam, Potsdam (2007)

Schmidt, I.: Charakterisierung der Mineralpartikelgrößen und Mineralpartikelorientierung in Knochen von Patienten mit Osteogenesis Imperfecta Typ I mittels Röntgenstreumethoden. Diplom, Technische Universität Berlin, Berlin (2012)

Schmitz, M.: High-resolution synchrotron x-ray scattering reveals the difference in the ultrastructure of biogenic and abiotic magnetite nanoparticles. Diplom, Humboldt-Universität, Berlin (2010)

Kerschnitzki, M.: Die Kontrolle der mechanischen Eigenschaften von Knochen durch die Veränderung der Temperatur, der Dehnrate, des pH-Wertes und des ionischen Mediums. Diplom, Universität Potsdam, Potsdam (2008)

Lukas, C.: Modeling of the mechanical implications of the inhomogeneity of bone material. Diplom, Technische Universität, Berlin (2008)

Lange, C.: Quantitative und qualitative Analyse der Gewebeentstehung in vitro. Diplom, Universität Potsdam, Potsdam (2007)

Wang, D.: Development of the chorioallantoic membrane assay for the study of multiple myeloma bone disease. Master, 69 S., Universität Potsdam, Potsdam (2021)

Zemke, F.: In situ characterization of formation processes of synthetic spider silk. Master, 62, vii, 10 S., Technische Universität, Berlin (2018)

Cerdá Doñate, E.: Life in a microcontainer. Microfluidic techniques to characterise magnetotactic bacteria. Master, 33 S., Université Claude Bernard Lyon, Lyon (2016)

Huss, J.: The material design behind serotiny: A comparative study of two Banksia species along a climatic gradient in Western Australia. Master, Freiburg (2015)

Tomschek, K.: Effect of pH on Magnetospirillum magneticum using fermentation. Master, Universität Potsdam, Potsdam (2014)

Rilling, T.: Design and manufacturing of mechanical tools to assist the characterization of silica aerogels. Bachelor, Technische Universtität, Berlin (2022)

Siri, M.; Sarlet, A.; Ziege, R.; Zorzetto, L.; Sotelo Guzman, C.; Amini, S.; Hengge, R.; Blank, K. G.; Bidan, C. M.: Mechanical comparison of Escherichia coli biofilms with altered matrix composition: a study combining shear-rheology and microindentation. bioRxiv: the preprint server for biology, 2025.02.07.637005 (2025)

Birjukovs, M.; Bente, K.; Faivre, D.; Kitenbergs, G.; Cebers, A.: Magnetic control of magnetotactic bacteria swarms. arXiv (2024)

Garrido, C.; Garske, D. S.; Bucher, C. H.; Amini, S.; Duda, G. N.; Schmidt-Bleek, K.; Cipitria, A.: Anisotropic hydrogel degradation enhances 3D collective cell alignment, mechanotransduction and osteogenic differentiation. bioRxiv: the preprint server for biology, 2024.04.11.588803 (2024)

Tam, N.; Dimova, R.; Cipitria, A.: Breast cancer cell-derived extracellular vesicles accelerate collagen fibrillogenesis and integrate into the matrix. bioRxiv: the preprint server for biology, 2024.08.08.607183 (2024)

Codutti, A.; Charsooghi, M.; Marx, K.; Cerdá Doñate, E.; Munoz, O.; Zaslansky, P.; Telezki, V.; Robinson, T.; Faivre, D.; Klumpp, S.: Escape problem of magnetotactic bacteria - physiological magnetic field strength help magnetotactic bacteria navigate in simulated sediments. bioRxiv: the preprint server for biology, 2023.12.08.570788 (2023)

Kiirikki, A. M.; Antila, H.; Bort, L.; Buslaev, P.; Favela, F.; Ferreira, T. M.; Fuchs, P. F.J.; Garcia-Fandino, R.; Gushchin, I.; Kav, B. et al.; Kula, P.; Kurki, M.; Kuzmin, A.; Madsen, J. J.; Miettinen, M. S.; Nencini, R.; Piggot, T.; Piñeiro, Á.; Samantray, S.; Suarez-Leston, F.; Ollila, O. H. S.: NMRlipids Databank makes data-driven analysis of biomembrane properties accessible for all. ChemRxiv: the Preprint Server for Chemistry (2023)

Kollert, M. R.; Krämer, M.; Brisson, N. M.; Schemenz, V.; Tsitsilonis, S.; Qazi, T. H.; Fratzl, P.; Vogel, V.; Reichenbach, J. R.; Duda, G. N.: Water-binding strength as regulator of extracellular-matrix mechanics enables detection of swelling-associated biophysical alterations using MRI. Research Square (2023)

Bente, K.; Kitenbergs, G.; Kriman, D.; Erglis, K.; Belovs, M.; Faivre, D.; Cebers, A.: Motion of magnetotactic bacteria swarms in an external field. (2017)

Fratzl, P.: How does the interaction of water with collagen lead to pretension in our connective tissues?, (2017)

Bergeron, V.; Miller, R.; Rubio, R. G.; Starov, V. M.: Honorary note: Clayton J. Radke, Advances in Colloid and Interface Science 233, S. 1 - 3 (2016)

Wagermaier, W.; Razghandi, K.; Fratzl, P.: A bio-inspired perspective on materials sustainability. (2025)

Gorb, S. N.; Carbone, G.; Speck, T.; Fratzl, P.: Advances in biomimetics: the power of diversity. Biomimetics: open access journal 10 (1), 54 (2025)

Ren, L.; Peng, Z.; Kwon, J.; Li, H.: Multifunctional, flexible, polymeric materials with controlled nanostructures. Frontiers in Materials 11 (2024)

Fratzl, P.: Introduction: sustainable materials. Chemical Reviews 123 (5), S. 1841 - 1842 (2023)

Fratzl, P.; Sauer, C.; Razghandi, K.: Editorial for the special issue: bioinspired architectural and architected materials. Bioinspiration & Biomimetics 17 (4), 040401 (2022)

Fratzl, P.: Wood made denser and stronger. Nature 554 (7691), S. 172 - 173 (2018)

George, A.; Berdal, A.; Fratzl, P.: Preface to the proceedings of the 12th international conference on the chemistry and biology of mineralized tissues. Connective Tissue Research 59 (sup 1), S. 1 - 5 (2018)

Liggieri, L.; Miller, R.: Combined surface analysis methods. Current Opinion in Colloid & Interface Science 37, S. A1 - A3 (2018)

Mileva, E.; Miller, R.: COST action MP1106 international symposium: “Smart and green interfaces: Fundamentals and diagnostics” (SGI-FunD 2015) October 29–31, 2015, Sofia, Bulgaria. Colloids and Surfaces A: Physicochemical and Engineering Aspects 519, S. 1 - 1 (2017)

Fratzl, P.; Speck, T.; Gorb, S.: Function by internal structure–preface to the special issue on bioinspired hierarchical materials. Bioinspiration & Biomimetics 11 (6), 060301 (2016)

Marques, E. F.; Valente, A. J. M.; Miller, R.: The 20th International Symposium on Surfactants in Solution (SIS 2014), Coimbra, Portugal on 22-27 June 2014. Colloids and Surfaces A: Physicochemical and Engineering Aspects 480, S. 61 - 62 (2015)

Arnebrant, T.; Nylander, T.; Miller, R.: The 26th Conference of the European Colloid and Interface Society held in Malmo, Sweden on 2-7 September 2012. Colloids and Surfaces A: Physicochemical and Engineering Aspects 442, S. 1 - 1 (2014)

Liggieri, L.; Miller, R.: Interfacial analysis techniques. Current Opinion in Colloid & Interface Science 19 (3), S. 175 - 175 (2014)

Malysa, K.; Miller, R.; Warszynski, P.: Preface. Colloids and Surfaces A: Physicochemical and Engineering Aspects 441, S. 787 - 787 (2014)

Mileva, E.; Radoev, B.; Miller, R.: ECIS 2013: 27th Conference of the European Colloid and Interface Society, September 01-06, 2013, Sofia, Bulgaria. Colloids and Surfaces A: Physicochemical and Engineering Aspects 460, S. 1 - 2 (2014)

Vollhardt, D.: Honorary note for Wolfgang Helfrich. Advances in Colloid and Interface Science 208, S. VII - IX (2014)

Aizenberg, J.; Fratzl, P.; Addadi, L.: Preface for the special issue celebrating Stephen Weiner’s 65th birthday. Journal of Structural Biology 183, S. 105 - 106 (2013)

Aizenberg, J.; Fratzl, P.: Biological and biomimetic materials. Advanced Materials 21 (4), S. 387 - 388 (2009)

Fratzl, P.; Grunze, M.: Editorial for Biointerphases in focus: research on biointerfaces with neutrons and synchrotron radiation. Biointerphases 3 (2), S. FB1 - FB2 (2008)

Paris, O.; Riekel, C.: Some introductory remarks on microbeam diffraction in nanobiosciences. Journal of Synchrotron Radiation 12, S. 712 - 712 (2005)

Skorb, E. V.; Andreeva, D.; Möhwald, H.; Fratzl, P.: A method for light-induced actuation of ph-sensitive assemblies and a composite material therefore. (2017)